MSefi.com read only forum (Jan.15,2018)

I'll try the bigger ones. Thanks for the answers.

2 Squirts, alternating, 8 injectors,306 cid v8

Ok! I probably need replace my current 36 injectors with 42, because this happened at full throttle, when I was tuning my VE table without AE on. I just afraid, whats is going to happen to my idle with bigger injectors, because my pulse width is now only 1,8ms.

Hi!

I found after datalogging that my max duty cycle was 123 and the max pw was 32. The AFR was fine. Do I need bigger injectors or how I should read those numbers?

I have same problem with Rotronic's adapter. I tried the older driver found from Tuner Studio site. With older driver no communication. Is there any other possibility, than buy a new adapter? If I have to buy a new one, how I can know what adapter will work?

Thanks! I found that one trnsistor was short circuited, and it's works now.

Mega 2 PCB3.0

Hello!

I tested Mega with stim and PMP LED is on all the time. So it seems that the problem is at the board. Any ideas, where I should start to search the problem?

Can you tell me where I could see, if the fuel pump is running with stim? I didn't find any indicator light from MegaTune.

Hello!

Fuel pump runs all the time if power is on in ECU. I have wired fuel pump to relay bord and it gives me 12v, even I don't start the engine. So it means that megasquirt keeps grounding the relaybord fuelpump relay, even if it should stop it if I don't crank the engine in 2s. Where's the ...