i've build my MS2 V3 board long while back. now i planned to upgrade the code to 2.88 for new added features. how can i know which code do i have?
and what are the steps to take for me to upgrade from 2.x to 2.88?
how to know my current firmware code version?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Philip Lochner
- Helpful Squirter
- Posts: 96
- Joined: Thu Feb 16, 2006 5:18 am
- Location: South Africa
- Contact:
viewtopic.php?t=28903how can i know which code do i have?
In general, Flash the latest code, activate the correct ini file and off you go!what are the steps to take for me to upgrade from 2.x to 2.88?
Best regards
Philip
'74 Jensen Interceptor Mk3 (MS-2 EFI, GPIO + GM 4L60e)
'80 Jaguar XJS 5.3L V12* (MS-2 EFI + dual EDIS-6)
and about 10 others.
Philip
'74 Jensen Interceptor Mk3 (MS-2 EFI, GPIO + GM 4L60e)
'80 Jaguar XJS 5.3L V12* (MS-2 EFI + dual EDIS-6)
and about 10 others.
-
Philip Lochner
- Helpful Squirter
- Posts: 96
- Joined: Thu Feb 16, 2006 5:18 am
- Location: South Africa
- Contact:
You could try but I doubt it will be successful. There is a file called audit.log that lists all the errors that occur during the process, but I recon your safest bet would be simply to export your VE and timing tables and transfer the other settings manually.
It is best though to start on-line with the default config that exists in MS after you've loaded the new firmware and change that by importing your VE and timing tables and then setting everything else the same as what you had on your earlier fw msq. Of course there will be many new parameters you will have to set as well. IAT fuel correction is one of those important ones
that may not have been present in earlier versions.
And
, there are things that are not what one may presume (seperate vs combined tables comes to mind...)
It is best though to start on-line with the default config that exists in MS after you've loaded the new firmware and change that by importing your VE and timing tables and then setting everything else the same as what you had on your earlier fw msq. Of course there will be many new parameters you will have to set as well. IAT fuel correction is one of those important ones
that may not have been present in earlier versions.And
, there are things that are not what one may presume (seperate vs combined tables comes to mind...)Best regards
Philip
'74 Jensen Interceptor Mk3 (MS-2 EFI, GPIO + GM 4L60e)
'80 Jaguar XJS 5.3L V12* (MS-2 EFI + dual EDIS-6)
and about 10 others.
Philip
'74 Jensen Interceptor Mk3 (MS-2 EFI, GPIO + GM 4L60e)
'80 Jaguar XJS 5.3L V12* (MS-2 EFI + dual EDIS-6)
and about 10 others.