Vehicle:
Fox Body Mustang
331 Stroker, Edelbrock Performer Heads, Vortech A trim, SVO 42 lbs. injectors
Megasquirt-II, with EEC-IV convertor box
Trying to figure out what are the best setting for the SVO 42 lb injectors and what is the best required fuel number to use.
How many squirts? 2, 4, or 8
Should I be alternating or simultaneous?
Also any idea on where to find a starting VE table and spark advance table?
Ford SVO injector settings
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
JnJSpdShop
- MegaSquirt Newbie
- Posts: 3
- Joined: Wed Aug 04, 2004 9:57 am
- Location: Western New York
- Contact:
-
ChevelleFan
- MegaSquirt Newbie
- Posts: 21
- Joined: Sun May 02, 2004 4:55 pm
- Location: Cleveland, Ohio
- Contact:
Re: Ford SVO injector settings
Start with 4 squirts/alternating. 42lb injectors could have some idling issues on a 331 cu-in engine from a too-short pulsewidth. Megatune should be able to generate a base VE table for you that'll at least get the car to start. For spark, you'll probably have to make your own. Mimic the settings that carb'd car of similar build would have -- ie, how many degrees initial? How much mechanical advance, and all-in by what RPM?
-Dave
-Dave
'70 Chevelle 406/TH350/3.55 / Hotchkis A-arms / Hotchkis Springs / B-body 12" brakes / 1.25" F-body swaybar
E-Tec 170, 233/241 @ 050, HSR, 58mm, 42lb injectors, Megasquirt-II
My updated Success Story / 12.34 @ 110 on youtube
E-Tec 170, 233/241 @ 050, HSR, 58mm, 42lb injectors, Megasquirt-II
My updated Success Story / 12.34 @ 110 on youtube