Hi all, I have a couple questions, one kind of depends on the answer to the other, so here goes.
1. How "resilient" are VR sensors? I ask, because, don't ask me how, but it looks like my VR sensor got hit or something jammed on the face of it, so their is a little chip (and it's kind of scratched_ out of the magnetic part. I don't know if this a new thing or not, but the reason I discovered it was my car is totally having RPM spikes that are making it undrivable, so I checked it out.
2. Is there anywhere you can buy a VR sensor other than searching out the junkyards? I know mine is a Ford, but not sure what model it's from, are they all different?
Thanks, (I guess that's 3 questions)
VR Sensors - 2 questions
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: VR Sensors - 2 questions
Hi! they are simply coils with a magnetic element inside, when a ferromagnetic element pases near changes its magnetic field producing a voltage signal.. They are strong, but if you have that spikes and worked fine before, maybe thats it. They are common, but come with different resistances. If you want to put a similar one just measure it. Good luck!
Fiat Uno SCR >> 45mm ITBs, 12.10 Circelli cam, DGM cylinder head, Megasquirt
Powered by CRB Racing
Powered by CRB Racing
-
66fb
Re: VR Sensors - 2 questions
Post a picture, maybe someone will know where to find a replacement.
Re: VR Sensors - 2 questions
I lucked out so bad today. Went to Pick n Pull not even knowing where to look. Looked on a couple 90's escorts and couldn't find one, walked up to a 2001 ford focus, the timing cover and water pump had been pulled by someone already and voila, there was an exact match to my VR sensor sitting there, it just took 2 bolts and bam! I ran home, installed and it fixed it right up!
Thanks for the help
Thanks for the help