Lean cruise?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
nitrousdave
- MegaSquirt Newbie
- Posts: 3
- Joined: Thu Jun 30, 2005 4:40 am
- Location: indiana
Lean cruise?
I haven't made it through all the manuals yet but was just curious if MS has (or anybody tried) a "lean cruise" mode like a lot of newer GM cars do? Thanks
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Lean cruise?
It's not too hard to pull off with a combination of VE table tuning and, depending on your firmware, the overrun fuel cut settings. Exactly how lean you can get it depends on the engine.
-
msoultan
- Helpful Squirter
- Posts: 58
- Joined: Sun Jun 27, 2004 11:04 am
- Location: Long Beach, CA - USA
Re: Lean cruise?
Check out this thread for some interesting reading:
http://www.thesamba.com/vw/forum/viewtopic.php?t=293837
mike
http://www.thesamba.com/vw/forum/viewtopic.php?t=293837
mike