wide band pulling lean.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
wide band pulling lean.
as the topic states this is the problem. i have got a ms2 v3 with 2.888 code. now the wide band reads ok does its 0 through5v thing. now when i set it to wide band from narrowband in ts the ego and afr gauge quite working and i get no read out from the wb in ts. is this in the code or what settings do i have buggerd up so that it wont read.
-
Philip Lochner
- Helpful Squirter
- Posts: 96
- Joined: Thu Feb 16, 2006 5:18 am
- Location: South Africa
- Contact:
Re: wide band pulling lean.
I'm sure Phil (author of TS) would have a better idea. I would advise you post this on the TS forum.
Did you try making a new project and specifying WBO during the project setup ?
Did you try going into dash designer and assigning the correct variable to the gauge?
Did you try making a new project and specifying WBO during the project setup ?
Did you try going into dash designer and assigning the correct variable to the gauge?
Best regards
Philip
'74 Jensen Interceptor Mk3 (MS-2 EFI, GPIO + GM 4L60e)
'80 Jaguar XJS 5.3L V12* (MS-2 EFI + dual EDIS-6)
and about 10 others.
Philip
'74 Jensen Interceptor Mk3 (MS-2 EFI, GPIO + GM 4L60e)
'80 Jaguar XJS 5.3L V12* (MS-2 EFI + dual EDIS-6)
and about 10 others.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: wide band pulling lean.
I'm a bit confused - why are you setting it to narrow band in the tuning software if you are using a wideband? Or did I misread what it is you're trying to do?
-
Southcross
- MegaSquirt Newbie
- Posts: 17
- Joined: Mon Dec 27, 2004 5:58 pm
- Location: Colorado, USA
- Contact:
Re: wide band pulling lean.
after you set the "EGO" to wideband, you need to calibrate the "AFR tables" (in the top menu, same place where you calibrate your TPS and your temp sensors) for they type of wideband
1979 Volkswagen Dasher MegaSquirted Turbo Drag Project a.k.a Mr Hanky
Re: wide band pulling lean.
hey, the reason i have it set to narrow band in the projects folder was becouse that was the only way the gauge would work in ts. i modifyd the gauge to read from 1 to 5v. when i switch it to wide band in the project folder it would compleatly kill the gauge. i had the ego set to wb in ts though. if i tried turning on the ego correction it would try to pull dead lean all the time. Now i did not know about the calibrate afr table thing. i will try that an let youns know how that works. thanks again people!
Re: wide band pulling lean.
got her working how it is supposed to! now im off to pop in a distributor then start on the spark side of life. thanks again.