i am using a 50cc injector ,the engine developes 1.5HP at 8000rpm .
can any body help give me a fuel table that i can get the engine running ,then i can modify from there.
table estimator
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
table estimator
I am converting a 25 cc engine to fuel injection. When i tried to use the table estimator it would not let me put 25cc in to the engine size. the smallest engine it will allow is a 491cc (500cc) also it won't allow me to put in a idle rpm above 1200rpm, as my engine idles at 2200rpm.
i am using a 50cc injector ,the engine developes 1.5HP at 8000rpm .
can any body help give me a fuel table that i can get the engine running ,then i can modify from there.
i am using a 50cc injector ,the engine developes 1.5HP at 8000rpm .
can any body help give me a fuel table that i can get the engine running ,then i can modify from there.
-
Southcross
- MegaSquirt Newbie
- Posts: 17
- Joined: Mon Dec 27, 2004 5:58 pm
- Location: Colorado, USA
- Contact:
Re: table estimator
I would think you could "double/half" the values/totals as needed
i.e. if 500cc is the smallest, and you need 25, 1/20th the result
i.e. if 1200rpm is the highest, and you need 2200... use 1100 and double the result
so, if my theory would work....500cc @ 1100rpm, 1/10th the result?
I know for a fact that with your VE, you can use the "double/half" your VE/ReqFuel and get identical results...
i.e. if 500cc is the smallest, and you need 25, 1/20th the result
i.e. if 1200rpm is the highest, and you need 2200... use 1100 and double the result
so, if my theory would work....500cc @ 1100rpm, 1/10th the result?
I know for a fact that with your VE, you can use the "double/half" your VE/ReqFuel and get identical results...
1979 Volkswagen Dasher MegaSquirted Turbo Drag Project a.k.a Mr Hanky