coil on plug setup!
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
dangerousdave
- MegaSquirt Newbie
- Posts: 5
- Joined: Sun Dec 20, 2009 6:29 am
coil on plug setup!
right i am hoping to have a coil on plug setup on my 2l zetec turbo and i have been offered the ones from a v5 golf now providing they fit over the plug in the engine and i have the wiring connectors I should be able to use them shouldnt i??
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: coil on plug setup!
As long as you know what sort of signal they need to trigger and have a rough idea of their dwell time.
-
dangerousdave
- MegaSquirt Newbie
- Posts: 5
- Joined: Sun Dec 20, 2009 6:29 am
Re: coil on plug setup!
i could find this out on auto data perhaps? ive been told it has the built in amp for ignition tho, would this be a problem? or am i better off with the duratec ones?
cheers for the help buddy!
cheers for the help buddy!
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: coil on plug setup!
The easiest option would be a regular Zetec coil pack. Ford coils can be done but are a bit more work.
Alldata doesn't have the waveform they need; if you have a different source, you're welcome to try it.
Alldata doesn't have the waveform they need; if you have a different source, you're welcome to try it.
-
dangerousdave
- MegaSquirt Newbie
- Posts: 5
- Joined: Sun Dec 20, 2009 6:29 am
Re: coil on plug setup!
ill do a bit more research as i really do want cop setup now!