hey i want to use my carb as the throttle body what changes are required to made to the exsisiting carb other than mounting the tps to it and cutting of the fuel supply......also i have an option of using a throttle body of a 1000cc 3 cylnder engine throttle body and it is not a individual throtle body.....what changes should i make to it ...to make it compatipable with a 75 cc engine which i am using....i am really confused will be really looking forward to some helpful replies
regards
aditya
carb as the tb
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: carb as the tb
I don't see a problem with using a carb with a TPS as a throttle body.
-
shaggymane
- MegaSquirt Newbie
- Posts: 1
- Joined: Tue Apr 13, 2010 6:09 pm
Re: carb as the tb
1000cc throttle body is wayyy too big for a 75cc motor
-
jb007
- MegaSquirt Newbie
- Posts: 14
- Joined: Sun Oct 19, 2008 7:10 pm
- Location: Hoppers Crossing, Victoria, Australia
- Contact:
Re: carb as the tb
I'm about to do the same to a SU carby ie a HIF44, you don't say what your carb is so this might not be relevant but have a look here: http://www.pattonmachine.com/ for more info. He only makes the adapter for some SU's and Stromberg's. The GM mini injectors will work with MegaSquirt as a low impedance injector. They are relatively low pressure at 12PSI, but take more pressure up to 20PSI (so I'm told).aditya wrote:hey i want to use my carb as the throttle body what changes are required to made to the exsisiting carb other than mounting the tps to it and cutting of the fuel supply......also i have an option of using a throttle body of a 1000cc 3 cylnder engine throttle body and it is not a individual throtle body.....what changes should i make to it ...to make it compatipable with a 75 cc engine which i am using....i am really confused will be really looking forward to some helpful replies
regards
aditya
Australian 1968 Morris Mini Deluxe 1310 A+ with Patton Machine Products HIF44 SU TBI Adapter
MegaSquirt III
My Blog: http://www.jims-blog.com
MegaSquirt III
My Blog: http://www.jims-blog.com