not to hijack your thread, but on a similar note, is there another fet driver that I can substitute for the IXDI404PI FET driver or the MC34151PG??
the electronics stores here in montreal are a lot on the stupid side, having nothing in stock and expecting me to order chips in the hundreds from the same site I can order it from (digikey) and pay them more.
Digi-Key backorder substitutions
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Slave2theBunny
- MegaSquirt Newbie
- Posts: 13
- Joined: Tue May 03, 2005 6:51 pm
- Location: Montreal Quebec
Re: Digi-Key backorder substitutions
Pics of my never ending t3 turbo bunny
http://www.vintagewatercooleds.com/phpB ... 29be64b574
http://www.vintagewatercooleds.com/phpB ... 29be64b574
-
Peter Florance
- Helpful Squirter
- Posts: 44
- Joined: Fri Apr 02, 2004 7:40 pm
- Location: Virginia Beach, VA
- Contact:
Re: Digi-Key backorder substitutions
My impression is the IXDI404PI is obsolete. I need them to repair V2.2 board. Have about 5 left.Slave2theBunny wrote:not to hijack your thread, but on a similar note, is there another fet driver that I can substitute for the IXDI404PI FET driver or the MC34151PG??
the electronics stores here in montreal are a lot on the stupid side, having nothing in stock and expecting me to order chips in the hundreds from the same site I can order it from (digikey) and pay them more.
Any recommended sub?
The MC34151PG will fail from time to time, sometimes damaging the pcb severely
Peter Florance
1981 BMW 528i
"Friends don't let friends use adjustable timing lights"
1981 BMW 528i
"Friends don't let friends use adjustable timing lights"
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Digi-Key backorder substitutions
Unfortunately, it's the best substitute we've found so far - nobody else seems to make a 40 volt version of this driver.Peter Florance wrote:My impression is the IXDI404PI is obsolete. I need them to repair V2.2 board. Have about 5 left.
Any recommended sub?
The MC34151PG will fail from time to time, sometimes damaging the pcb severely
On V3.0s, you can protect it by changing D21 to a 16 to 18 volt zener.
