fidle control a supercharger?

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
blackotto
MegaSquirt Newbie
Posts: 19
Joined: Thu Jul 30, 2009 9:50 pm

fidle control a supercharger?

Post by blackotto »

hi guys! i know it is possible to make the fidle do on off switching...but how?the supercharger i have has a ac style clutch on it and i need to make it come on at about 1000rpm and only run under load conditions(off at idle,cruise and decel)i cant run it all the time or it will burn up. do i have to change parts inside ms? or is it in the programing? thanks for any advice
16vconvert
MegaSquirt Newbie
Posts: 4
Joined: Sat Mar 11, 2006 7:13 pm
Location: Levittown , PA

Re: fidle control a supercharger?

Post by 16vconvert »

Just send the fiddle to a relay that switches high power to the clutch, you can chain conditions
To get the SC to come on on a certain rpm range andstay odd on decel
blackotto
MegaSquirt Newbie
Posts: 19
Joined: Thu Jul 30, 2009 9:50 pm

Re: fidle control a supercharger?

Post by blackotto »

thank you very much convert, :RTFM: :arrow: :yeah!:
Post Reply