v2.888 firmware need
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
v2.888 firmware need
Im looking for the v2.888 firmware. does anyone have a link to find them. does any one have link to find msq files for different types of engines.
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: v2.888 firmware need
jz,
Use 2.891 instead of 2.888. 2.891 is very similar, but has a few bugs fixes. You can find it here: http://www.megamanual.com/files/code/
Even better, use 2.905, the latest release code.
The INI are here: http://www.megamanual.com/files/ini/
You can find most things from the manual table of contents: http://www.megamanual.com/mtabcon.htm
Lance.
Use 2.891 instead of 2.888. 2.891 is very similar, but has a few bugs fixes. You can find it here: http://www.megamanual.com/files/code/
Even better, use 2.905, the latest release code.
The INI are here: http://www.megamanual.com/files/ini/
You can find most things from the manual table of contents: http://www.megamanual.com/mtabcon.htm
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw
Re: v2.888 firmware need
thanks. i want to use the msq file that DIYAutoTune has for the tbi system on there website.I was created using firmware 2.888. And i read to use the same firmware as the msq file, when the engines are almost the same.
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: v2.888 firmware need
jz,
You should be able to load a 2.888 MSQ file into 2.891 (or 2.905 for that matter). A few user parameters will have been added, and TunerStudio will warn you about the ones that are missing from the MSQ.
Take a note of those from the warning, and look them up here: http://www.megamanual.com/mt29.htm and adjust them accordingly (the added parameters will have the default values in them, and these defaults are usually compatible with older MSQs, but check to be sure).
2.888 would have been removed because it has a serious bug of some sort, and isn't recommended for use by anyone.
Lance.
You should be able to load a 2.888 MSQ file into 2.891 (or 2.905 for that matter). A few user parameters will have been added, and TunerStudio will warn you about the ones that are missing from the MSQ.
Take a note of those from the warning, and look them up here: http://www.megamanual.com/mt29.htm and adjust them accordingly (the added parameters will have the default values in them, and these defaults are usually compatible with older MSQs, but check to be sure).
2.888 would have been removed because it has a serious bug of some sort, and isn't recommended for use by anyone.
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw