MS2 V3 using edis igintion
Firmware code v2.905
Ford Zetec Blacktop
I can't get the car started and not sure if the attached datalog helps diagnose the problem.
The car has been sat for 6 months, so have checked the battery, fuel etc
But i'm stumped now, pulling my hair out now, just to add i fitted a different fusebox but i'm 95% sure everything got connected properly
All help greatly welcome, i'm hoping this is just a blonde moment
MS2 EDIS Ignition Problem
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
MS2 EDIS Ignition Problem
You do not have the required permissions to view the files attached to this post.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: MS2 EDIS Ignition Problem
If you are getting fuel and ignition, it looks like you need to adjust the cranking pulse width.
Re: MS2 EDIS Ignition Problem
i've been a very silly boy, my girlfriend pointed out i got fuel pressure but no fuel in the cylinder. spark plugs were dry.
Injectors had an earth and not 12v live
thanks for the help
Injectors had an earth and not 12v live
thanks for the help
-
DonTZ125
- Experienced Squirter
- Posts: 337
- Joined: Sat May 16, 2009 1:49 pm
- Location: Scarborough, ON
- Contact:
Re: MS2 EDIS Ignition Problem
Well, better unpowered injectors than a crankcase full of fuel from jammed-on injectors!
