Serial extension

For discussing Phil Tobin's TunerStudio MS is the MegaSquirt edition of TunerStudio, a next generation tuning application. It provides the ability to configure and tune all MegaSquirt controllers and is 100% compatible with MegaTune ini files and msq's.

Moderator: LT401Vette

Forum rules
Post Reply
355vette
Helpful Squirter
Posts: 72
Joined: Fri Aug 24, 2007 9:06 pm
Location: Vancouer Island

Serial extension

Post by 355vette »

I have your Bluetooth adapter and using it with ms2 3.57. The area right behind the mounting screws is very hard to get at and the ms2 is in an awkward spot. So I thought maybe a 1' straight through cable could be installed and just be left as a pigtail for when it is needed. Does there appear to be any problem with that. Thanks
Top
kjones6039
Master Squirter
Posts: 618
Joined: Sat Jul 22, 2006 7:02 pm
Location: Eureka, Nevada USA
Contact:
Contact kjones6039

Re: Serial extension

Post by kjones6039 »

FWIW......... I use a pigtail (although a bit shorter) for the same purpose as you that works quite well. Mine allows me to switch between BT and straight serial at will.

Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/ms2extra 3.4.0 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
Top
355vette
Helpful Squirter
Posts: 72
Joined: Fri Aug 24, 2007 9:06 pm
Location: Vancouer Island

Re: Serial extension

Post by 355vette »

Thanks..I live on an island so couldn't get one till I go off but now went to an old junk bucket and fount an old 10 footer so tried an all is well. Will get shorter when I go off.
Top
Post Reply

Return to “TunerStudioMS”