No Power?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Datbeardo944
- MegaSquirt Newbie
- Posts: 13
- Joined: Tue Apr 04, 2017 9:43 am
No Power?
Hello all, I am on megasquirt 2 V3.0 and I just finished building it. I am trying to load firmware but I am stuck because there are zero responses. I gic it power and nothing happens. The only power that I can find on the board is at the top (or the banded) side of D4. I replaced it with another one and still the same thing. I am baffled as to what I should do next. I am a total newbie and so I am sorry if this is a dumb question. Thank you so much for your help.
Re: No Power?
Is there 5v at the proto area? If you've fitted the daughter card, remove it until you have the correct voltages at the various test points.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband