Page 1 of 1
super high IAT
Posted: Fri Apr 21, 2006 6:02 pm
by benflynn
My datalogs from a dyno run the other day had IAT as high as 335+ The boost was not turned too much, well with in the turbo's abilitys. I use a GM iat sensor. Are these temps even possible?
Posted: Sun May 14, 2006 5:38 pm
by rufusbooth
So this bodes the question of what IAT sensor would be better suited for high temp inlet temps and more linear?
Cheers,
Rufus
Posted: Thu Jun 01, 2006 1:08 am
by Fry
Hey rufus - i'm testing a kawasaki ZX6R unit at the moment - i'll post up if it's any use to you.
Posted: Fri Jun 02, 2006 9:54 am
by kev_rm
Even if the IAT was "accurate" in a stable state, the GM sensor is too slow under rapidly changing boost (and MAT) anyway which is probably why OEM setups typically have a IAT at the MAF. (not to mention the MAF itself)
I'm working on a mod to MS-II code to better compute air density in boost. Probably be a couple weeks.