Hello Roger,
I'd like to recompile a modded code (like mskpa.asm but #100T as refernce instead of #65T --> allways open loop (n/a) viewtopic.php?t=1233). Lance was so kind to compile it for me, but I use BOSCH and DENSO sensors.
Is it necessary to use the P&E stuff or is it possible t do with ET4?
Can I start select 'custom', select mskpa.s19 with Start Adress "F500" (like code 2.98/3.0)? I ask because 65T has only 2 but 100T has 3 digits and I can't test correct math with stim. Sorry if this sounds stupid but I know only that's possible to make errors, but not how (how not).
»Horst
Recompiling with ET4
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Recompiling with ET4
Horst,ami8break wrote:Hello Roger,
I'd like to recompile a modded code (like mskpa.asm but #100T as refernce instead of #65T --> allways open loop (n/a) viewtopic.php?t=1233). Lance was so kind to compile it for me, but I use BOSCH and DENSO sensors.
Is it necessary to use the P&E stuff or is it possible t do with ET4?
Can I start select 'custom', select mskpa.s19 with Start Adress "F500" (like code 2.98/3.0)? I ask because 65T has only 2 but 100T has 3 digits and I can't test correct math with stim. Sorry if this sounds "slow" but I know only that's possible to make errors, but not how (how not).
»Horst
Yes, you can use EasyTherm for this purpose. Select custom, F500, hit 'Create', browse to your .s19 file. ET will create a new .s19 file with 'mod' in the name (ie meganew.s19 -> meganewmod.s19). When you hit download' it grabs the mod version , and downloads to MS.
Roger.
-
ami8break
- MegaSquirt Newbie
- Posts: 13
- Joined: Sun May 02, 2004 10:45 pm
- Location: Austria, Graz
- Contact:
Recompiling with ET4
Hello Roger,
thank you. ET4 and start adress F500 worked perfect, but I was dissapointed about Steinhart-Hart approximation. More: viewtopic.php?t=2421
»Horst
thank you. ET4 and start adress F500 worked perfect, but I was dissapointed about Steinhart-Hart approximation. More: viewtopic.php?t=2421
»Horst