Bosch TPS connector source

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
jshep
MegaSquirt Newbie
Posts: 3
Joined: Thu Dec 22, 2005 2:54 am
Location: Fayetteville, NC

Bosch TPS connector source

Post by jshep »

I bought a Bosch TPS (0 280 122 001) on ebay. It arrived without the 3 wire connector. Short of scrounging around a salavge yard, does anyone know of a source for these items?
Thanks,
Jim S.
510rob
MegaSquirt Newbie
Posts: 6
Joined: Wed Jan 05, 2005 1:24 am
Location: Vancouver

Post by 510rob »

jshep
MegaSquirt Newbie
Posts: 3
Joined: Thu Dec 22, 2005 2:54 am
Location: Fayetteville, NC

Post by jshep »

thanks 510rob
Post Reply