hall effect sensors output more of a squarewave, processing the low level signals inside the sensor. The VR will have to send a relativly low level signal that needs amplifying and "cleaning up" ath the MS. -- So I would think that the Hall would be a more reliable signal.
LEs
Megasquirt logging only at first
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
LeslieTroyer
- Helpful Squirter
- Posts: 35
- Joined: Tue Nov 20, 2007 11:46 am
-
66fb
Re: Megasquirt logging only at first
Julian
In MT under menu item FILE select DATALOGGING. It will create a log file with an XLS extension which you can view using MegalogViewer
In MT under menu item FILE select DATALOGGING. It will create a log file with an XLS extension which you can view using MegalogViewer
-
66fb
Re: Megasquirt logging only at first
MS will be fine running with no outputs loaded. Mine has spent more hours running on the bench than in the car with no problems.