I want my MS to control the evap system for my truck. I was looking at the different types of OEM purge solenoids and they look to be a little more complicated than a simple on/off operation (either PWM or stepper). I was thinking of just buying something like a Nitrous Purge Valve and having it controlled by a spare output. I was thinking I can enable it at >160 temp and VE < 50kpa or something.
Will this work?
Is there a GM OEM solenoid that would work instead of using a NOS solenoid?
Vapor Canister Purge Solenoid
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: Vapor Canister Purge Solenoid
hi what we used an my hilux was the oem valve which was a on/off valve and used one of the spare outputs
used the coolant and throttle position as requirements. i think it was 70 celsius and i use very small throttle openings around town 10 - 12% cruising so set it at 12%. try and have a scout around a wrecker for maybe a late model hilux or camry or corolla maybe even a 1990's cressida. pretty failsafe sort of a part to buy so should be cheap.
neil
used the coolant and throttle position as requirements. i think it was 70 celsius and i use very small throttle openings around town 10 - 12% cruising so set it at 12%. try and have a scout around a wrecker for maybe a late model hilux or camry or corolla maybe even a 1990's cressida. pretty failsafe sort of a part to buy so should be cheap.
neil
2000 dualcab hilux with 1uz toyota power