Mounting EDIS module near MS ECU?

This forum is for discussing ignition setup, tuning, and troubleshooting for MS-II. Click these links for info on GM's HEI, EDIS, direct coil control, others.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Black P-38
MegaSquirt Newbie
Posts: 2
Joined: Thu Jul 30, 2009 7:58 am

Mounting EDIS module near MS ECU?

Post by Black P-38 »

Hey guys,
Can I mount my EDIS-8 module inside, under the dash, near the Mega Squirt II and relay board or will there be interference with it's operation? I believe the EDIS module must be isolated from any source of magnetism, such as audio speakers, to prevent damage, what about the MS II ECU?

Thanks,
Mike
Top
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: Mounting EDIS module near MS ECU?

Post by Matt Cramer »

I wouldn't expect a problem.
Top
Black P-38
MegaSquirt Newbie
Posts: 2
Joined: Thu Jul 30, 2009 7:58 am

Re: Mounting EDIS module near MS ECU?

Post by Black P-38 »

Alright then, I'll proceed as planned.

Thanks Matt!
Top
Post Reply

Return to “MS-II Ignition Setup, Tuning, and Troubleshooting”