Good day All,
Will the megasquirt 2 with PCB board 3.0 be able to run over 21 pounds of boost.
megasquirt and boost.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: megasquirt and boost.
I think it goes up to 22lbs of boost.
If you need more DIYAutoTune.com sells a 4 bar for a reasonable price
If you need more DIYAutoTune.com sells a 4 bar for a reasonable price
MS2 v3.0 pcb, 2.891 firmware w/ flex fuel mod
Ford eDIS-4
1000cc injectors
Saturn 1.9L
....lots of boost with a 50 shot of anti-lag.
Ford eDIS-4
1000cc injectors
Saturn 1.9L
....lots of boost with a 50 shot of anti-lag.
-
Nitrobanshee
- MegaSquirt Newbie
- Posts: 9
- Joined: Mon Apr 24, 2006 8:51 am
- Location: NC.
Re: megasquirt and boost.
The stock map sensor (2.5bar) is good for 21PSI , but as stated above DIYAutoTune sells the map Daddy which is a four bar map. That is somewhere around 40psi of boost.
So to answer your question, it would be no without the map daddy or at least a 3 bar sensor.
So to answer your question, it would be no without the map daddy or at least a 3 bar sensor.
1995 Nissan Pickup truck running Megasquirt V2.2 MSII 2.881 EDIS with a turbo.
Dyno #s 354WHP 381Foot pounds
KA24E-t Power
Dyno #s 354WHP 381Foot pounds
KA24E-t Power