HI ,
I just installed the megasquirt ecu to a 4age engine using a directly fired coil , am using a triggerwheel with vr pick up, when idleing all plugs fire!! but when I increase the load it starts to missfire badly, but when I pull the bracket that holds the vr sensor out from the trigger wheel ,it fires grand , just wondering has anyone had any problems like this ,have a new vr sensor ordered , any info would be great before I pull my hair out !!!
Thanks
IGNITION PROBLEMS
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: IGNITION PROBLEMS
Could be an input problem, could be an output. If you could post a data log of the problem happening and a copy of your MSQ file, I can go over them and see if I can narrow down which one it is.
-
corolla4age
- MegaSquirt Newbie
- Posts: 2
- Joined: Thu Dec 17, 2009 9:36 pm
Re: IGNITION PROBLEMS
Matt Cramer wrote:Could be an input problem, could be an output. If you could post a data log of the problem happening and a copy of your MSQ file, I can go over them and see if I can narrow down which one it is.
Hi Matt,
Thanks for your reply ,I am very new to megasquirt, and havnt done a datalog yet ,but I will try a new Vr sensor and if that dosnt work Ill find out how to post a data log and post it , Thanks Matt,( my computer skills arnt the best!!!)
Niall