Hi:
trying to adjust an engine and I have noticed that air temperature correction,but I IAT Correction to 0 in the table at all temperatures,code change from 2889 to 2891 and remains the same.
distorts the adjustment and I do not know why it does, I'm working on alpha-n.
makes me wonder if this well and has to do with the gas law or I do not see something wrong, I may allude.
thanks
correction IAT
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: correction IAT
It has a curve based on the ideal gas law build in; the curve you see is to modify the curve already there.
-
valenciano
- Helpful Squirter
- Posts: 43
- Joined: Fri Sep 05, 2008 12:44 pm
Re: correction IAT
when I read in the manual qe some people had discovered that the law makes them ideal not working well I never thought I would be one of those people.
at the same RPM and TPS position far lc1 varies depending on the temperature of the air, I guess it is to use alpha-n and have not adjusted the table boxes VE,guess we have to adjust the temperature correction or attempting aie that this EV is closer to the actual values of MAP, the latter seems more dficil me, advise me.
thanks Matt.
at the same RPM and TPS position far lc1 varies depending on the temperature of the air, I guess it is to use alpha-n and have not adjusted the table boxes VE,guess we have to adjust the temperature correction or attempting aie that this EV is closer to the actual values of MAP, the latter seems more dficil me, advise me.
thanks Matt.