hi guys,
my name is james and i have been directed here for some help.
I have a mk 5 escort rs2000(i4 engine) which i have converted to 2.3 and have fitted a turbo. i had the car on a rolling road at power engineering as i was only going to be running a low boost set up and hoped the standard map sensor and managment would be able to take around 5psi, but no luck. only 2psi lol.
They told me megasquirt would be perfect for what i want and have directed me here.
im not very clued up when it comes to managment, so hoping for your help. the car runs edis and twin coil packs, and i need to be able to run boost up to around 8psi, and in the future around 18psi.
i really need to know what model ecu to use and what extra bits i will need to make it as easy as possible to install.
thanks in advance james
ecort rs2300 turbo (managment needed)
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
drmiller100
- Helpful Squirter
- Posts: 37
- Joined: Sun Mar 21, 2010 8:20 pm
Re: ecort rs2300 turbo (managment needed)
i contacted the fellers at diy auto, one of the vendors who sells the megasquirt, and have been pretty happy.
my guess is megasquirt 2, or possibly microsquirt, depending on specifics. DIY can help you figure it out.
Your setup is pretty standard, and it comes down to how much you want to solder yourself, versus just buying a controller ready to go.
my guess is megasquirt 2, or possibly microsquirt, depending on specifics. DIY can help you figure it out.
Your setup is pretty standard, and it comes down to how much you want to solder yourself, versus just buying a controller ready to go.