Tunerstudio vs AE wizard

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
madk4speed
MegaSquirt Newbie
Posts: 6
Joined: Fri Feb 26, 2010 12:37 pm

Tunerstudio vs AE wizard

Post by madk4speed »

Hello,
I am using Tunerstudio MS v2.0.3 and Megasquirt 2 in an Alfa Romeo 75 (Milano) 3.0 V6.
I am using code 3xx.
I am having some difficulty tuning the Accel enrichment. The accel maps are PW adder ms on the Y axis.
I am not quite sure how this is working. I tried a few things but the engine run very rich every time the accel pedal was pressed.
Even with the stock accel enrichment settings.
Where can I find some help on this?
Matt Cramer
Super Squirter
Posts: 2951
Joined: Sat Jul 03, 2004 11:35 am

Re: Tunerstudio vs AE wizard

Post by Matt Cramer »

If you're looking for directions on how to tune the AE, you can find them here:

http://www.megamanual.com/ms2/tune.htm#accel
Post Reply