MSefi.com read only forum (Jan.15,2018)

MS2 V3 using edis igintion
Firmware code v2.905
Ford Zetec Blacktop

I can't get the car started and not sure if the attached datalog helps diagnose the problem.

The car has been sat for 6 months, so have checked the battery, fuel etc

But i'm stumped now, pulling my hair out now, just to add i fitted a different fusebox but i'm 95% sure everything got connected properly

All help greatly welcome, i'm hoping this is just a blonde moment

If you are getting fuel and ignition, it looks like you need to adjust the cranking pulse width.

i've been a very silly boy, my girlfriend pointed out i got fuel pressure but no fuel in the cylinder. spark plugs were dry.

Injectors had an earth and not 12v live

thanks for the help

Well, better unpowered injectors than a crankcase full of fuel from jammed-on injectors!