MSefi.com read only forum (Jan.15,2018)

I'm glad I could help. Are you still in Oregon?

Right now I am living in Seattle. My wifes in grad school at UofW. She drives my project every other day so I don't get to work on it. But I figure I will have everything I need to swap it in when I get a chance.

Will be moving back to Oregon ...

Here is my page on building my fuel rail.

http://www.hitechengineering.net/DNN/MegaSquirted450slc/Step4FuelRailfabrication/tabid/60/Default.aspx

oughtsix

Saved this link in my favorites. This is what I am looking for.

By the way I was born and raised in The Dalles, Oregon just north of you ...

I wanted to thank you for the reply and tell you that I will keep you in mind. I have been discussing my project with my dad who is a machinist/welder. He has agreed to tig weld my injector bungs into the manifold. I think we will also be able to workout the rails. I am wondering do I have to ...

efahl,

Thanks for the links. I don't have time right now but I will give them a good study.

Colter

I am going to use fuel rail from Ross Machine. I am using bungs for my manifold. I am wondering how I should drill the holes in the fuel rail? I would like not to have to buy the expenisive stepped drill bit. Any suggestions would be appriciated.

Thanks,

Colter

Eliot,

Do you think its wise to use a hand drill on the manifold or should I use a mill to put the holes in it for the bungs? My Dad is a machinist but he doesn't have the time so I figured I would try and do it with a hand drill. But I guess I am not in any rush.

Thanks,

Colter

So I guess that having the injectors at different heights doesn't effect the way the engine runs or if it did you were able to tune around it?


Make sure you have your fuel rail stock and throttle body handy – to ensure you have sufficient clearance for the throttle cable and TV/Kickdown ...

Eliot,

I looked at your project awhile back and let me say that your setup is everything that I want mine to be. I was wondering how you compensated for the different heights of the runners? I assume you bought prefabbed injector bungs. The ones I bought are coming from Ross Racing Machine. I plan ...

Okay,

I want to use one of my two duel plane manifolds for mpfi. I kind of have an idea on what to do. But since the runners are at different heights its kind of problematic when placing the injector bungs. I was wondering how I would go about getting everything level?

I don't want t switch to a ...

I have a holley unit. I ordered the 16 mm unit and couldn't get it to work, if it doesn't work for you take a look at this guys setup it worked for me.

If you take a look at his throttle body set up he has the fitting you need and the part numbers. http://z28boy.cz28.com/main.htm


I just ordered ...