"Rich H" wrote:
Is there any way of getting around this? Is there an alternate option to a trigger wheel? all the other sensors are already fitted and should be fine.
You either need to add material back into two of the teeth, write a
wheel decoder for that tooth pattern or fit a more "standard ...
Search found 3 matches
- Wed Dec 06, 2006 4:10 am
- Forum: MS-II Ignition Setup, Tuning, and Troubleshooting
- Topic: MS and the Rover K series
- Replies: 9
- Views: 1534
- Wed Jul 12, 2006 5:33 am
- Forum: MS-II Ignition Setup, Tuning, and Troubleshooting
- Topic: Spec for EDIS vr sensor to wheel distance
- Replies: 1
- Views: 903
Spec for EDIS vr sensor to wheel distance
"quinn" wrote:
> Having trouble finding a spec for distance. What are we looking at? 1/16", 1/8" ?
Cripes, you want it a lot closer than that. A constant distance throughout
the revolution is more important than absolute distances but somewhere in
the 0.5-1.5mm is what you should be looking at ...
> Having trouble finding a spec for distance. What are we looking at? 1/16", 1/8" ?
Cripes, you want it a lot closer than that. A constant distance throughout
the revolution is more important than absolute distances but somewhere in
the 0.5-1.5mm is what you should be looking at ...
- Mon May 15, 2006 5:29 am
- Forum: OEM EFI Hardware
- Topic: Ford Zetec - Coil Plugs - where to buy in UK & Part Nos
- Replies: 1
- Views: 560
Ford Zetec - Coil Plugs - where to buy in UK & Part Nos
"Eales V8" wrote:
> I needed 2x Ford Zetec 'coil plugs' for the V8 installation, for what I do, the less joints the better, so if you want new plugs and pins etc here's where :
Do you mean the twin-driver coil that sits on top of two of the 4 plugs
in a 4-cyl with a short HT lead to the other plug ...
> I needed 2x Ford Zetec 'coil plugs' for the V8 installation, for what I do, the less joints the better, so if you want new plugs and pins etc here's where :
Do you mean the twin-driver coil that sits on top of two of the 4 plugs
in a 4-cyl with a short HT lead to the other plug ...