MSefi.com read only forum (Jan.15,2018)

Matt Cramer wrote:A lot of 60-2 wheels work better with a 10K resistor on the VR sensor signal wire. Let me know if this helps.

It sure fixed me up! 2 different wheels and 2 different sensors both with erratic or non-existant signals. Soldered the resistor inline and instant cure to my woes

Any of the harnesses mentioned will probably work, and all of them will probably need to have the ECU plug cut off to wire it into MS, whether you use a relay board, or solder directly to the DB37. With that said, you can also easily make your own harness. It's not hard, just a little tedious after...