MSefi.com read only forum (Jan.15,2018)

+3 on the cleaner install. This was the only way I knew to do it. If there is something nicer I would change it.

wow, that was so helpful! so , i can do a search like that for like the boost control and others? i like pictures. i have ms and i have serious cognitive issues.. i can talk about the stuff all day, but when it gets time to do it ..im lost.. thanks for your help! don russell

Bentvalve, I was not ...

Here you go should be able to find what your looking for.

http://www.google.com/search?tbm=isch&hl=en&source=hp&biw=1280&bih=584&q=pwmiac+mod&gbv=2&oq=pwmiac+mod&aq=f&aqi=&aql=&gs_sm=12&gs_upl=2672l9844l0l11954l10l10l0l5l0l0l219l984l0.2.3l5l0&gs_l=img.12 ...

I am in the same boat as the original poster. I was hoping that no soldering would need to be done with the 3.57 board, but it looks like there is. I am not going to atempt it, I am terrible at soldering. So I will have to take it to an elecrical repair shop or something. Just to verify, this is ...

MS does not need to drive EDIS8. EDIS is, essentially, a standalone ignition system. You only need to provide PIP from the Ford module to trigger MS. Then MS needs to send SAW back to EDIS to control timing.

Jumpers and wiring are all explained here:

http://www.megamanual.com/ms2/EDIS.htm

Bottom ...

Im finishing up my MS2 V3 build I plan on using EDIS8 Is it better to jumper the JS10 to IGN or to use the High Current Ignition Driver Circuit.
Thank You

I think I know what to do. looks like I need the PWM MOD kit.
Thanks

So far so good I have completed the test at Step 55 and everything checks out :D. While reading ahead I got hung up on step 62 I dont know if My idle valve is relayed or not? If it is do I need to order more parts to get it setup? How do I need to configure My MS2 V3.0 to get this to work with my ...