Search found 4 matches

by jzsquared
Sat Apr 25, 2015 9:19 am
Forum: General Information
Topic: TPS on 32/36 weber
Replies: 0
Views: 1750

TPS on 32/36 weber

So i'm trying to figure out if anyone has ever installed a TPS on the weber 32/36 carb to be used a throttle body for a VW megasquirt conversion. Since a throttle body really is just a way to let the air in I figured it would be a great inexpensive way to convert a VW air cooled engine. These ...
by jzsquared
Fri Apr 17, 2015 5:57 pm
Forum: MS-II and V2.2/V3 Main Board Assembly, Testing, and Troubleshooting
Topic: Basic on/off solenoid cold start
Replies: 3
Views: 554

Re: Basic on/off solenoid cold start

Figured it out, I went into advanced , output port setting and just set coolant to below 160 . Woo hoo I have a simple fast idle just what I needed
by jzsquared
Fri Apr 17, 2015 11:07 am
Forum: MS-II and V2.2/V3 Main Board Assembly, Testing, and Troubleshooting
Topic: Basic on/off solenoid cold start
Replies: 3
Views: 554

Re: Basic on/off solenoid cold start

I had the thermostat setting at 200 so it should have turned on. I again heard a short buzzing but the valve didn't open
by jzsquared
Fri Apr 17, 2015 7:10 am
Forum: MS-II and V2.2/V3 Main Board Assembly, Testing, and Troubleshooting
Topic: Basic on/off solenoid cold start
Replies: 3
Views: 554

Basic on/off solenoid cold start

I'm having trouble with what should be a basic connection of a simple 2003 GM solenoid for fast idle and could use some help. First thing is do I set the tacho output to IAC1 or just leave it off ? Second is the valve only supposed to work with the engine running or when the key is on based on ...