MSefi.com read only forum (Jan.15,2018)

My 92 Dakota has a push button to turn on the A/C I just wired in a relay to light thats lit when the button is in to work my fan.
Just an idea

Sorry I dont know the specs but you could use a volt/Ohm meter to measure the voltage going into it from the original wire.
Just an idea

8974Ollie wrote:Who said anything about welding? use a good epoxy sealant and screws.
Or fabricate a gasket.

I wouldnt trust it but thanks for the idea

8974Ollie wrote:This adapter ring.

http://www.vetteworksonline.com/ls1_conversion_fuel.htm

Kinda hard to weld steel to alum

I got a new 15gal alum fuel cell and I want to mount an in tank fuel pump. Its 18"Lx20"Wx10"D My idea is to get a round tube about 5" round weld a bottom on, then cut the side out about 5" from the bottom. Then mount the pump inside and return line inside. There will be a 6...

I got a new 15gal alum fuel cell and I want to mount an in tank fuel pump. Its 18"Lx20"Wx10"D My idea is to get a round tube about 5" round weld a bottom on, then cut the side out about 5" from the bottom. Then mount the pump inside and return line inside. There will be a 6&...

Thanks for the input. I didnt think it would work too good but I had to ask to make sure..
I will be doing a new fuel system.
Thanks again.

Has anyone tried to used a stock low pressure mechanical fuel pump to feed remote sump tank that feeds a high pressure pump?

A few years back someone posted a web site for a machine shop that made low cost 4barrel throttle bodies that had the injectors mounted in the side of the TB I think it was in AZ but not sure. They had several items they machined for fuel injection. My computer crashed and I lost all my info. Anyone...

Something I found I needed putting these kits together is a magnifying glass..