Megasquirt and the fuel pump relay

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
allen22
MegaSquirt Newbie
Posts: 4
Joined: Thu Oct 20, 2005 8:49 am

Megasquirt and the fuel pump relay

Post by allen22 »

Hello again,
Does Megasquirt II control the fuel pump relay through pin 37? This is how my stock computer was wired, just double checking.

thanks,
allen
allen22
MegaSquirt Newbie
Posts: 4
Joined: Thu Oct 20, 2005 8:49 am

Post by allen22 »

Lance,
Yup I've seen it, have it on my desk. Sorry about the dumb question! When it comes time to really do it I always second guess myself when it comes to wiring.

allen
Post Reply