Having trouble finding a spec for distance. What are we looking at? 1/16", 1/8" ?
I don't know,
Thanks for the help.
Lee
Spec for EDIS vr sensor to wheel distance
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Spec for EDIS vr sensor to wheel distance
"quinn" wrote:
> Having trouble finding a spec for distance. What are we looking at? 1/16", 1/8" ?
Cripes, you want it a lot closer than that. A constant distance throughout
the revolution is more important than absolute distances but somewhere in
the 0.5-1.5mm is what you should be looking at.
Posted by email.
> Having trouble finding a spec for distance. What are we looking at? 1/16", 1/8" ?
Cripes, you want it a lot closer than that. A constant distance throughout
the revolution is more important than absolute distances but somewhere in
the 0.5-1.5mm is what you should be looking at.
Posted by email.