Fuel Pump Question
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Fuel Pump Question
I am megasquriting a 91 VW corado with a vr 6, using EDIS 4 with megasns and v2.2. The issue I am having is when I tried to control the fuel pump with megasquirt (instead of running whenever the ingnition is on) I used pin 37 in the db37 cable to control the fuel pump as specified in the megamanual via a relay. It didnt work so I verified the relay connections by taking the signal wire from the relay and jumping it straight to the battery and the fuel pump ran. I have determined that the fuel pump output from megasquirt on pin 37 isn't energised (even though the display in megatune says it is) Please Help
-
eliotmansfield
- MegaSquirt Newbie
- Posts: 12
- Joined: Sat Apr 03, 2004 12:39 am
- Location: Milton Keynes - UK
- Contact:
Fuel Pump Question
Is that a typo? Cant run edis4 on a 6 cylinder engine.I am megasquriting a 91 VW corado with a vr 6, using EDIS 4