I am going to install a megesquirt on my F134. since I have to fab everything, I have been looking for part numbers for the various sensors, that are preferred by megasquirt.
I just bought an S-10 throttle body,(ebay) it has a TPS and single injector on it. should I just use this vehicle type to purchase the additional sensors? Or is there a list some where, of preferred parts, that I have yet to find?
Jay
65 Jeep F134 4 cyl
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Desert Runner
- MegaSquirt Newbie
- Posts: 1
- Joined: Fri Oct 06, 2006 2:28 pm
- Location: Hickory, Pa
I think 81 is to 95 GM sensors are the default for MS. Do a search in the manual for sensors and you'll find part numbers, etc..
Hope this link works.
http://www.megamanual.com/v22manual/mwire.htm#clt
If you have other sensors and you know the sensors output you can use easytherm with MS1 or calibration with MS2 to make many sensors work with MS. FYI I am using sensors off a 4.0 Jeep on my 258.
Brian
Hope this link works.
http://www.megamanual.com/v22manual/mwire.htm#clt
If you have other sensors and you know the sensors output you can use easytherm with MS1 or calibration with MS2 to make many sensors work with MS. FYI I am using sensors off a 4.0 Jeep on my 258.
Brian
MS2 code2.89 on PCB v3.0