Rev Limiting with MSD ignition
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Rev Limiting with MSD ignition
If I am going to use an MSD 6 series ignition box, is there any advantage to getting the MSD 6AL box that has rev limiter in it, or can I just get the 6A box, and control the rev limit from MSII?
-
TT350chevelle
- MegaSquirt Newbie
- Posts: 31
- Joined: Sun May 02, 2004 7:51 am
- Location: Winnipeg,Canada
- Contact:
Re: Rev Limiting with MSD ignition
Yes.TheMonkey wrote: or can I just get the 6A box, and control the rev limit from MSII?
Brad J.
Homebuilt Twinturbo 68 Chevelle
MS Extra code,fuel and spark control
355cid,3800lbs & 3.30-1 gears
ET 10.46@134mph with 19psi boost
MS Extra code,fuel and spark control
355cid,3800lbs & 3.30-1 gears
ET 10.46@134mph with 19psi boost
-
oughtsix
- MegaSquirt Newbie
- Posts: 25
- Joined: Tue Feb 28, 2006 6:44 pm
- Location: Redmond, Oregon
- Contact:
I have two cars running MSD 6AL's. There is no advantage to having a 6AL over the 6A's with megasquirt. I was able to pick up my 6AL's cheaper than 6A's which is the only reason I went with the 6AL's.
1980 450slc converted to MegaSquirt electronic fuel injection and couldn't be happier! Using the stock dizzy and a MSD 6AL ignition along with the stock Bosch ignition box. Home built fuel rails out of aluminum fuel rail stock. Using 19lb mustang injectors I purchased off of ebay.
--Mike.
--Mike.