what is resistance of gm sensors @ 80 deg c

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
timbeardsley
MegaSquirt Newbie
Posts: 2
Joined: Tue Aug 30, 2005 1:09 am
Location: Chesterfield UK

what is resistance of gm sensors @ 80 deg c

Post by timbeardsley »

Hi all
I have a Lucas book of temp sensors that are available in the UK, but they are all listed with resistance @ 80 deg c, can anyone tell me the resistance of a GM sensor @ 80 deg c so that i can cross ref. :RTFM: if there is any then we could go hunting in scrap yards for a known sensor over this side of the pond
Cheers Tim
Top
TT350chevelle
MegaSquirt Newbie
Posts: 31
Joined: Sun May 02, 2004 7:51 am
Location: Winnipeg,Canada
Contact:
Contact TT350chevelle

Post by TT350chevelle »

Megamanual-Wiring and Sensors-Temperature Sensors
http://www.megamanual.com/v22manual/mtabcon.htm
Homebuilt Twinturbo 68 Chevelle
MS Extra code,fuel and spark control
355cid,3800lbs & 3.30-1 gears
ET 10.46@134mph with 19psi boost
Top
timbeardsley
MegaSquirt Newbie
Posts: 2
Joined: Tue Aug 30, 2005 1:09 am
Location: Chesterfield UK

Post by timbeardsley »

Hi
thanks for that, when i looked a bit harder i found it under the DELPHI product data. looks like they are fitted to quite a few cars in the UK.

Cheers Tim
Top
Post Reply

Return to “Wiring and Sensors”