Injector Fuel rail for Mercedes M103 3.0L engine

For discussing injector selection,manifold modifications, throttle bodies, fuel supply system design and construction, and FIdle valves and IACs.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
initialitaly
MegaSquirt Newbie
Posts: 1
Joined: Sun Sep 16, 2007 7:44 am

Injector Fuel rail for Mercedes M103 3.0L engine

Post by initialitaly »

Hi,
I am new here.
Just to see if anybody knows if the fuel injector rail coming off from Mercedes M104 (2.8L, 3.2L, 3.6L) engine can fit the M103 3.0L engine. :RTFM:

I am looking for replacing the CIS system of my Mercedes W126 300SEL with modern fuel injection system, so thinking of Megasquirt.

That requires a fuel injection rail that can fit the M103 engine. If the rail from M104 engine can fit, then I need not to custom make the fuel rail.
Cheers!
Top
strain
MegaSquirt Newbie
Posts: 6
Joined: Tue Nov 07, 2006 5:10 am

Post by strain »

Hi, I've an a Mercedes 200E '92 squirted and I know that is not the same engine, the best thing is to build it yourself or someone who knows. Maybe you need to do some work in the intake manifold too to fit the new injectors, I'll recomends you something like the bosch EV6 long high impedance (you can get it on ebay).

Regards,
STRAîN
Top
SDConcepts
MegaSquirt Newbie
Posts: 4
Joined: Thu Jul 20, 2006 4:14 am
Location: warren
Contact:
Contact SDConcepts

Post by SDConcepts »

I make custom fuel rails, let me know if i can help set you up. also if you have an old one for me to work from thats ideal.
Check out my website:

Http://www.superiordesignconcepts.com
we specialize in custom efi fabrication as well small scale cnc and prototype design.
Top
Post Reply

Return to “Injectors, Fuel & Air Supply”