twin injectors bike and car

For discussing injector selection,manifold modifications, throttle bodies, fuel supply system design and construction, and FIdle valves and IACs.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
stylus pete
MegaSquirt Newbie
Posts: 2
Joined: Thu Sep 27, 2007 9:09 am
Location: Wirral U.K.

twin injectors bike and car

Post by stylus pete »

Hi, yet another newbie asking dumb questions :oops:
I am planning on using MSII and V3 on a silvertop zetec. I've already made the manifold up using the ford flange and GSXR600 boddies so that I have two sets of injectors :D . The ford car ones very close to the head and the suzuki ones 6 inches upstream, so the question is can I switch or feather between them at a set point in the rev range and how? :?
I have had a look thru varios threads and can't find anything :RTFM: surely this has been done already!!
Am I choosing the correct proccessor and board or is there a better way?
Thanks in advance, any thoughts and help much appriciated!!
Pete...
Top
stylus pete
MegaSquirt Newbie
Posts: 2
Joined: Thu Sep 27, 2007 9:09 am
Location: Wirral U.K.

Post by stylus pete »

That sounds easy enough :?
I will have to do a bit more reading but I think I understand the two maps idea!!
Thanks..
Pete..
Top
Post Reply

Return to “Injectors, Fuel & Air Supply”