Question on Injection?

NateP · Post by **NateP** » Sun Apr 06, 2008 2:13 pm

Hi Folks,

Have v6 with firing order 1-6-5-4-3-2

Would it be correct for 2 pulses per cycle in alternating fashion (every 360 * crank rotation--one bank is fired?) for bank 1 to consist of 1-6-5, and bank 2: 4-3-2?

I see them 120 degrees apart (even fire), 1-6-5 are the first 360 degrees crank rotation. 4-3-2 are the remaining 360 degrees rotation forming one engine cycle -- 720*?

Thanks
MS I V3 with MSnSE

NateP · Post by **NateP** » Sun Apr 06, 2008 2:33 pm

Sweet paint picture of what's going on in my brain:

Tommy · Post by **Tommy** » Mon Apr 07, 2008 2:05 pm

This have been discused on the forum so you might find more info if you search. But I belive moste have found that they get best idle and tipinn with alternating conection (1,5,3-6,4,2) and as many squirts as they can use limited by the injection time at idle.

Tommy

NateP · Post by **NateP** » Mon Apr 07, 2008 3:57 pm

Tommy,

MS manual states banks will fire on "injection events"

My question is...what exactly defines an injection event?