Tuning in Madison Wi. Area?

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Kevin_techee
MegaSquirt Newbie
Posts: 1
Joined: Sun Jun 15, 2008 5:54 pm

Tuning in Madison Wi. Area?

Post by Kevin_techee »

Any one live near Madison Wi. Would like to learn from someone that's good at tuning, I just don't get it !!! Kevin
HPjunkie
Helpful Squirter
Posts: 47
Joined: Fri Dec 28, 2007 6:25 am
Location: Rockford Ill

Re: Tuning in Madison Wi. Area?

Post by HPjunkie »

Does it run? Is it super/turbo charged? Are you controlling ignition?
2332 Air-cooled VW, EDIS, Garrett turbo, MSII, 15psi, 1300lb car. : )
Post Reply