Alpha n

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
cyclecyko
MegaSquirt Newbie
Posts: 1
Joined: Tue Jul 08, 2008 11:30 pm

Alpha n

Post by cyclecyko »

Is it possible to set up MS so that you are running speed density during part throttle and Alpha N @ WOT ??
Top
newtyres1
Helpful Squirter
Posts: 48
Joined: Mon Feb 06, 2006 7:32 pm
Location: Brisbane, Australia

Re: Alpha n

Post by newtyres1 »

In Megatune, go to Fuel Set-Up/Injection Control, look in the control algorithm box and set it to Blend SD/Alpha-n. Then go to Fuel Set-Up/Alpha-N Blending. This is for MS2. You will need the latest ini file to allow SD at low rpm and Alpha-n at higher rpm, as far as I know.

more info: viewtopic.php?f=31&t=31927&hilit=blending+alpha

Ian.
Top
Post Reply

Return to “Tuning Fuel and Air”