I want to know how is the mixture when is red in the bottom bar of the main megatune page.I'm not sure if is rich or lean.
I hope somebody help me.
Thanks.
Att. ELuis
How read O2 sensor gauge?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
devastator
- Experienced Squirter
- Posts: 333
- Joined: Mon Feb 11, 2008 10:19 am
- Location: Kinda near Tucson Arizona
Re: How read O2 sensor gauge?
What sort of O2 gauge are you using?
Sandrail-ACVW 2276 cc, Turbo
MS-II W/spark burning E85
The sand must be punished.
MS-II W/spark burning E85
The sand must be punished.
Re: How read O2 sensor gauge?
I'm using the bottom bar, which start in green and finish with red. And sometimes I use the air:fuel ratio gauge that start with 10:00 and finish with 19:40.Really what I want to know is if the engine is rich when is in green and lean when is in red.
Thanks.
Thanks.
-
Buick pwr'd Brit
- MegaSquirt Newbie
- Posts: 12
- Joined: Tue Aug 22, 2006 8:48 pm
- Location: Wa st.
Re: How read O2 sensor gauge?
Green is lean, red is rich. The switch point is 14.7 to 1 if you have MS set up for gasoline.
Bill
Bill
73 MGB, 215 Buick V8, supercharged, MSII
Re: How read O2 sensor gauge?
Thanks. Bill now I'm more sure when I do tuning.