Does AMC work with two tables?
My VE1 seems to improve but VE2 doesn't.
AMC and two tables
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: AMC and two tables
It does, but I think you have to set the dual table option.
-
markthepadrone
Re: AMC and two tables
I have dual tables set. O2 correction on table 1 seems to go down but table 2 always seems to need the same amount of correction.
Re: AMC and two tables
In looking at the code both VE tables are updated at the same time provided you have specified a dual ego option - either 2 NBs or 2 WBs, and you have a valid signal on each - that is a voltage that is not very close to 0 and not very close to 5V.
-
markthepadrone
Re: AMC and two tables
Thanks.
I was having a problem with the latest firmware in the LC-1s.
The right O2 sensor was giving wacky readings so it was always trying to correct.
I was having a problem with the latest firmware in the LC-1s.
The right O2 sensor was giving wacky readings so it was always trying to correct.