This my engine running whit a MegaSquirt 3.0 Using a Toyota

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
trdae86gts
MegaSquirt Newbie
Posts: 3
Joined: Mon Aug 11, 2008 9:43 am

This my engine running whit a MegaSquirt 3.0 Using a Toyota

Post by trdae86gts »

This my engine running whit a MegaSquirt 3.0 Using a Toyota Vast Ignition System

1 - http://es.youtube.com/watch?v=nbost2hb7zM
2 - http://es.youtube.com/watch?v=sAlTxP5oPZI

Cardomain:

http://www.cardomain.com/ride/2975227

Thanks to Matt Cramer from DIYAutoTune.com and DIYAutoTune.com for all support and information..

The video is in Spanish because i am from Dominican Republic

more in a few weeks
ForumAdminTeam
Site Admin
Posts: 78
Joined: Mon Dec 25, 2006 8:45 am

Re: This my engine running whit a MegaSquirt 3.0 Using a Toyota

Post by ForumAdminTeam »

trade86gts,

Please post this at www.msruns.com, where it is likely to remain available for a much longer time.

Forum Admin Team
Post Reply