Hello:
Suddenly to left of working afterstar and warnu, in estimulador if it works.
Verified tps and and turned to calibrating for if it was the problem but not to served you are welcome.
Other one asks, the priming pulse in order that it serves exactly, I do not understand very well the translation of the manual.
Thank you in advance.
Suddenly to left of working afterstar and warnu (enrichment
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
valenciano
- Helpful Squirter
- Posts: 43
- Joined: Fri Sep 05, 2008 12:44 pm
-
valenciano
- Helpful Squirter
- Posts: 43
- Joined: Fri Sep 05, 2008 12:44 pm
Re: Suddenly to left of working afterstar and warnu (enrichment
Forget, I work with ms2 v3 and code 2883.
-
valenciano
- Helpful Squirter
- Posts: 43
- Joined: Fri Sep 05, 2008 12:44 pm
Re: Suddenly to left of working afterstar and warnu (enrichment
and tried to boot all day without success, afterstar if it works but it seems as if it were not triggered either, as if it never reaches rpm to 300 active and when it does not drop in DATALOG. megatune in turns afterstar but it turns off right away.
started well before but I am beginning and we have to improve many things, but suddenly stopped functioning after putting c 12 and a filter to remove noise in 12v rpm, then it started and began to fail and will not start.
and removed spark plugs and make, and removed injectors and injected, and tested with other seda and anything.
DATALOG on whether there rpm and all the sensors are fine, in addition to the stimulating if it works well, I am starting from 0, code in MS2 and megatune from 0 to provide, any suggestions.
started well before but I am beginning and we have to improve many things, but suddenly stopped functioning after putting c 12 and a filter to remove noise in 12v rpm, then it started and began to fail and will not start.
and removed spark plugs and make, and removed injectors and injected, and tested with other seda and anything.
DATALOG on whether there rpm and all the sensors are fine, in addition to the stimulating if it works well, I am starting from 0, code in MS2 and megatune from 0 to provide, any suggestions.