Impact shut off switches

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
MrN2OBelvedere
MegaSquirt Newbie
Posts: 13
Joined: Fri Aug 01, 2008 8:09 am

Impact shut off switches

Post by MrN2OBelvedere »

I found an impact shut off switch for a mustang. Is this possible to use to wire my fuel pump? Does anyone have any suggestions on a switch I should use?
66fb

Re: Impact shut off switches

Post by 66fb »

If your engine doesn't need any more fuel than the Mustang motor you should be just fine with that.
Mike_Robert
MegaSquirt Guru
Posts: 84
Joined: Fri Apr 09, 2004 5:55 am
Location: FL, USA

Re: Impact shut off switches

Post by Mike_Robert »

See http://www.fordmuscle.com/forums/all-fo ... witch.html for details - that thread describes it better than I can... Particularly the relay suggestion.

-Mike
Post Reply