Hey, I've been looking for awhile and I just cant seem to find any information. I am trying to setup my F22B2 engine to run fuel and spark. I have everything but my crank sensor set up. I'm running a single coil. I need to know how to set up the wheel decoder settings, as well as the dwell settings. I also dont know how many teeth are on my crankshaft. Supposidly it doesnt have any missing teeth.
If anyone knows, please help!!
Thanks
Crank sensor setup for 96 Honda Accord
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: Crank sensor setup for 96 Honda Accord
Thanks Lance. I used a digital multimeter and connected the + and - end to their respective wires. I spun the crank very slowly. I got 12 rising spots and 12 falling spots. Is there any way I can use this data for the wheel decoder?
Thanks,
Josh
Thanks,
Josh